top of page
Clearwater LoungeP 2 MB.png

FAQS

How Can We Assist?

FAQ: FAQ

HOW DO I INFLATE MY LOUNGE POUCH?

How to inflate Lounge Pouch


Take your Lounge Pouch out of the carrying case.

Unbuckle the buckle. 


Your new chair will correctly form its shape once completely inflated. 


You will notice there are 4 plastic pieces (in the fabric) at the opening. Give them a little bend to straighten them out.


Now..


Lounge Pouch are designed with 2 separate chambers.  The goal is to scoop air into each chamber separately.

The best way to remember this is 1 up, 3 down.  Meaning, hold 1 plastic piece up and the other 3 down.

Open up as wide as possible. Scoop in air,  and close it quickly so that the air you have amassed does not escape.

And then repeat, scoop in air, close quickly. Once you have amassed enough air in this chamber, put all 4 plastic pieces together and flip right side up.

And now again, 1 up, 3 down. Scoop air into the second chamber and close quickly. Repeat until you have enough air in the second chamber.

Now hold the 4 plastics together shut tight. Begin rolling inwards. When rolling the chair on itself like a dry bag, remember to make sure the fabric doesn’t get in the way of the buckles so you will be able to buckle it up in the end.

The more you roll it up, the more firm the chair will be. When you have rolled up the chair on itself enough (around 4-5 times), take the two buckles and bend them towards each other like the letter C and click the buckle. 


Set your Lounge Pouch down on the ground or in the water and enjoy!

IS THERE A VIDEO I CAN WATCH?

Yes! scroll down to the bottom of the home page and you will find helpful videos on how to inflate.

HOW DO I INFLATE MY LOUNGE POUCH TO MAKE IT A CHAIR?

Lounge Pouch can be used as a chair as well as a lounge.

​

After both chambers are completely filled with air and you are holding the 4 plastic pieces together at the opening of your lounge pouch, set it down on the ground and press with two hands on the middle of both chambers to empty half of the air equally from the 2 chambers.

Then take hold of the 4 plastic pieces, make sure to keep them closed tight so you don't lose the existing air in the chambers. Roll them inwards four or 5 times. Buckle it.. and enjoy! 

bottom of page